( 주)썬텍정보통신에 오신 것을 환영합니다.

Home

Quatech

네트워크 장비

Serial Device Servers

Data sheet

Board-only, OEM solution
Easy integration and configuration. PowerPC® microprocessor drives high throughput and industry's lowest latency
Network enable RS-232 serial devices for remote access and control
Remote Web browser-based configuration, administration and troubleshooting
Auto-detecting 10/100 Mbps Ethernet with built-in TCP/IP
Raw TCP and IntelliSock™ TCP socket services for custom applications
Configure as TCP Server, TCP Client, or as both using the exclusive AutoTCP feature
Serial Tunneling mode for connecting two serial devices over a network without a PC
1 or 2 independent RS-232 serial ports
DB-9 models available
Surge suppression package standard
Virtual COM drivers for Windows Windows NT4/2000/XP/Vista/7 & Linux, other OS support via socket modes
5 year limited warranty
External device servers (wired and wireless) also available

LAN Interface:	10/100 BaseT (IEEE 802.3), auto-negotiation. RJ-45 Network connector
Serial Interface:	RS-232 (EIA-232), asynchronous DTE configured with full modem control and hardware flow control
Serial Connectors:	Standard DB-9 male for "D" models
Serial Ports:	SSE: 1 port DSE: 2 ports QSE: 4 ports ESE: 8 ports
OS Support:	Windows NT/2000/XP/Vista/7 and Linux. Other OS support via Raw TCP and IntelliSock™ TCP socket services
Data Rate:	115.2 kbps max per port
UARTs:	SSE: 16C550 with 16-byte FIFO DSE/QSE/ESE: 16C750 with 64-byte FIFO
Receiver Inputs:(RS-232)	Input Voltage Rating: -15V to +15V Receiver Skew: 120 ns (typical), 250 ns (max)
Parity, Stop bits:	Parity Configurable as: None, Even, Odd Data Bits Configurable as: 5, 6, 7, 8 Stop Bits Configurable as: 1, 1.5, 2
Surge Suppression:	Surge suppression is standard on EMB models. Surge suppressor is capable of sustaining up to 40-A peak, 8 x 20μs transient surges, a clamping voltage of 30V and a peak energy dissipation of 0.1 Joules. (NOTE: The "SS" option limits data rate to 115.2 kbps due to capacitive loading).
Hardware:	Processor: Motorola MPC855T Dual CPU PowerPC® SDRAM: 8 MB FLASH Memory: 2 MB Firmware stored in FLASH may be upgraded via LAN interface
Protocols and Software:	Management Protocols: UDP, TCP/IP, HTTP, DHCP, ARP, SNMP, Raw TCP and IntelliSock™ TCP socket services IP Configuration Methods: DHCP or Static IP set through Installation Wizard, Web browser interface or custom UDP datagram utility Quatech Utilities: Windows-based Installation Wizard, Web browser-based Management Utility Operating Modes & Protocols: Windows API COM, TTY, TCP Server, TCP Client, Serial Tunneling, AutoTCP, Raw TCP or Intellisock TCP Socket Services
Power Requirements:	DC input, with Auto-sensing AC adapters provided for 100 VAC-240VAC, 50Hz-60Hz
Environment:	Operating: 0°C to 70°C Storage: -40°C to 70°C Humidity: 10% to 90% non-condensing
Dimensions:	SSE/DSE-100D-EMB: Height: .61" (1.54 cm) Width: 3.50" (8.89 cm) Depth: 4.50" (11.43 cm)
Certifications:	CE, FCC Class B